Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 712

16 Appendix
Parameter
Print control
16
712
Item No.
150 Selects a graphics language. This setting affects to IW, OW, and UC of HP-GL/
(HP-GL mode) 2 commands.
[0] (Default) : HP-GL
[1]
Note • To print HP-GL/2 command that does not include BP command, select [HP-
151 Sets the size of hard clip area.
(Hard clip) In HP-GL mode, the plottable area is determined in line with the paper size,
apart from the printable area. This area is called the "hard clip area", and
determines the maximum range of pen movement. Accordingly, images
cannot be drawn outside the boundary of the hard clip area.
[0]
[2] (Default) : Paper
For more information on hard clip area, refer to "Hard Clip Area" (P.715).
152 (Eject Sets the command that indicates the end of plotting. When the command
command SP) specified here is received, plotting is terminated and the paper is output.
[0] (Default) : OFF
153 (Eject
[1]
command
The default value is [ON] for SPO, and [OFF] for the others.
SPO)
Note • If multiple commands are specified, when one of the commands is
154 (Eject
command NR)
155 (Eject
command FR)
156 (Eject
command PG)
157 (Eject
command AF)
158 (Eject
command AH)
Value
: HP-GL/2
GL/2].
: Standard
: ON
received, plotting is terminated and the paper is output.