Notes And Restrictions - Fuji Xerox ApeosPort-V C6676 Administrator's Manual

Notes and Restrictions

This section describes the notes and restrictions to observe when using the machine.
Notes and Restrictions on the Use of the Machine
 Notes on Switching Off the Main Power and Power
Power off processing is performed internally on the machine for a while after the power is
switched off. Therefore, do not switch the main power off immediately after switching the
power off. Do not switch the main power off while the touch screen displays a screen or the
<Power Saver> button blinks. Switching off the main power may damage the hard disk and
the memory or cause a machine malfunction. In addition, the machine will not be activated
soon if you switch on the power before the touch screen gets blank. Confirm that the touch
screen is blank before switching on the power.
 Options
 To use the Secure Print, Sample Print, and Delay Print features, the optional hard disk is
required for some models.
To use the Print Stored File feature, the Scanner Kit (optional) is required.

 To use the machine as a PostScript printer, the Adobe PostScript 3 Kit (optional) is
required.
 About the <Main Power> indicator
 For 110 V:
The power indicator will not be turned off immediately after the power is switched off.
The machine takes approximately 40 seconds before the light goes out.
 For 220 - 240 V:
The power indicator will not be turned off immediately after the power is switched off.
The machine takes approximately 170 seconds before the light goes out.
 Switching the Power Off from Remote Location
Using CentreWare Internet Services, you can turn the machine off, but not on. To do this
operation, you are required to enter CentreWare Internet Services as system administrator.
Note
 Installing and Moving the Machine
When moving the machine to another location, contact our Customer Support Center.

 When the machine is operating, do not subject it to shock.
When closing the document cover, be careful not to pinch your fingers.

 Do not place any objects near the ventilation openings of the machine's exhaust fan.
 Character Code
In data transmission from a computer or read processing of data in a medium such as a USB
memory device, if characters that the machine does not support are included in folder and
file names, these characters may not be displayed correctly.
When the Media Print - Photos service is used, only ASCII characters can be used.
• If there are any jobs in process, the request for powering off the machine will not be processed.
Notes and Restrictions
725
16