Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 515

Error Code
016-703 [Cause] The machine received an e-mail specified with an invalid folder number.
[Remedy] For errors occurring during fax or Internet fax transmission:
Contact our Customer Support Center.
For errors occurring during e-mail/fax/Internet fax reception:
Take one of the following measures:


If the error still is not resolved, contact our Customer Support Center.
016-704 [Cause] The folder is full, and hard disk capacity is insufficient.
[Remedy] Delete unnecessary files from the folder, and save the file.
Refer to "6 Send from Folder" > "Checking/Operating Files in a Folder" in the User Guide.
016-705 [Cause] Probable causes are as follows:
1)You have specified the machine for the folder registry for the scanned document.
2)You have not used the print driver for the machine.
3)The machine received a Secure Print, Print Stored File, Charge Print, or Private Charge
[Remedy] For 1), press the <Services Home> button, and check whether [Scan to PC] is displayed.
If [Scan to PC] is displayed, then check whether the scanned document can be stored in
a folder. If unable to store it in the folder, install the Scanner Kit (optional).
For 2), use the print driver appropriate for the machine.
For 3), check whether the hard disk is installed on the machine.
If the hard disk is not installed:


If the hard disk is installed:

If the error still is not resolved, contact our Customer Support Center.
016-706
[Cause] The hard disk space is insufficient because the number of Secure Print users exceeded
the maximum limit.
[Remedy] Delete unnecessary files from the machine, and delete unnecessary Secure Print users.
For more information on deleting users for Secure Print files, refer to "11 Job Status" > "Printing and Deleting Stored
Jobs", and on folders, refer to "6 Send from Folder" > "Checking/Operating Files in a Folder" in the User Guide.
016-707 [Cause] Unable to print with the Sample Set feature because the hard disk is not installed.
[Remedy] To use the Sample Set feature, the hard disk must be installed. Contact our Customer
Support Center.
016-708 [Cause] Unable to annotate because of insufficient hard disk space.
[Remedy] Delete unnecessary data from the hard disk to free up disk space.
016-709 [Cause] An error occurred during print processing.
[Remedy] Contact our Customer Support Center.
016-710 [Cause] Unable to register the Delayed Print document because the hard disk is not installed.
[Remedy] To use the Delayed Print feature, the hard disk must be installed.
Cause and Remedy
Register the specified folder number, and request the sender to send the e-mail/fax/
Internet fax again.
Request the sender to send to an available folder.
However, the Scanner Kit (optional) is not installed.
Print job with no hard disk installed.
If you do not need to use the feature, select [Not Installed] under [Hard Disk] on the
[Options] tab of the print driver.
If you need to use the feature, install the hard disk.
Select [Installed] under [Hard Disk] on the [Options] tab of the print driver.
Error Code
15
515