Delete Form; Register Google Cloud Print; Other Settings - Fuji Xerox ApeosPort-V C6676 Administrator's Manual

Delete Form

You can delete registered ESC/P-K forms.
1
Select [Delete Form].
2
Select the print mode to delete forms.
3
Enter the form number with the numeric
keypad, and select [Confirm].
 ESC/P
Deletes ESC/P-K emulation forms.
 Form Number
When you select an item to delete, you can
enter the form number.
 Form Name
After you enter the form number and select [Confirm], the form name matching the form
number entered appears.
4
Check the form name, and then select [Delete Data].

Register Google Cloud Print

This setting is displayed when you register the machine to Google Cloud Print.
For more information, refer to the User Guide (For Google Cloud Print).

Other Settings

You can configure other settings related to the paper used in the printer.
Print Area
Set whether or not to expand the print area.
For more information about the printable area, refer to "Printable Area" (P.661).
Substitute Tray
When there is no tray containing the paper size selected by the Auto Paper selection, select
whether or not to print with paper loaded in another paper tray. In the event of using a
substitute tray, select the paper size from [Use Larger Size], [Use Closest Size], or [Select Tray
5].
Note
 Display Message
Does not use a substitute tray, but displays a paper loading message.
 Use Larger Size
Switches to the next larger size of paper than previously selected and prints at the same
magnification.
• When documents are printed using emulation such as ESC/P-K and HP-GL/2, the substitute tray
setting is not valid and a message prompting you to load paper displayed on the screen.
Print Service Settings
5
245