Trouble During Scanning; Unable To Scan With The Machine - Fuji Xerox ApeosPort-V C6676 Administrator's Manual

Trouble during Scanning

This section describes how to resolve scan problems.
Note

Unable to Scan with the Machine

If you cannot scan with the machine, identify the symptom in the following table to perform
the remedy.
Symptom
The document is
not correctly fed
from the
document feeder.
• The Scan features are not available for some models. An optional component is required. For more
information, contact our Customer Support Center.
Cause
The document is too small.
The document type is
unsuitable.
The document guides are set
in incorrect positions.
A piece of torn paper remains
in the document feeder.
Documents of mixed sizes are
loaded.

Trouble during Scanning

Remedy
The minimum size of the document that can
be loaded on the document feeder is 125 x
85 mm (Standard size: A5, A5 ).
Refer to "5 Scan" > "Scanning Procedure" in the User
Guide.
The document feeder does not feed irregular
sized documents, business cards,
transparencies, or thin documents.
In addition, the document feeder does not
feed documents with sticky tags, paper clips,
or adhesive tape.
Refer to "5 Scan" > "Scanning Procedure" in the User
Guide.
Adjust the document guides to the
document.
Refer to "5 Scan" > "Scanning Procedure" in the User
Guide.
Open the document feeder cover, and
remove the piece.
Refer to "Document Jams" (P.623).
When loading documents of mixed sizes, be
sure to set [Mixed Size Originals] to [On].
Otherwise, a paper jam will occur.
Refer to "5 Scan" > "Layout Adjustment" in the User
Guide.
15
483