Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 474

15 Problem Solving
Printing is slow.
The specified
print options are
not enabled.
The document
edges are missing
on the printout.
The output color
differs between
Secure Print and
Print Stored File.
The print color
differs from
before.
Black lines are
printed.
15
474
Symptom
[High Resolution] is selected
for [Image Quality].
The print driver for another
model is used.
The required optional kit is
not installed on the machine.
The image is larger than the
printable area.
This is because the print path
is different. The output color
of Print Stored File is
reproduced by the presence
or absence of dots, as with
copying or faxing. On the
other hand, the output color
of Secure Print is reproduced
using density by default, as
with printing.
The color calibration is
incorrect.
A print driver for another
machine is used.
Cause
When image data, such as photos, is printed
with the high resolution, the print speed
becomes slow. Select [Standard] for [Image
Quality].
Install the print driver for the model.
Check the optional components installed on
the machine, and set [Installable Options]
under [Configuration] in the print driver
again.
Expand the printable area of the machine, or
reduce the image size on the printout.
To closer match the color of Secure Print and
files in folder, select [On] in [Image Options]
> [Print Page Mode] on the [Advanced] tab of
the print driver settings.
Execute auto calibration.
Refer to "Executing Calibration" (P.107).
Install the print driver for your machine.
Remedy