Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 646

16 Appendix
Paper Size
Continuous Print Speed
Printing Resolution
PDL
Protocol
16
646
* Maximum:
SRA3 (320 x 450 mm), 12.6 x 17.7" (320 x 450 mm),
12 x 18" (305 x 457 mm), A3
[Bypass Tray: 12 x 19" (305 x 483mm), 320 x 1,200 mm
Minimum:
A5
[Bypass Tray: Postcard, Envelope (120 x 235 mm)]
Image Loss Width:
Top edge: 4 mm, Bottom edge: 2 mm,
Left and Right edges: 2 mm
* : Printing long document (106 - 256 gsm) is supported. However, when any finisher is installed,
the long document print is not supported.
Same as the continuous copy speed
Important • This speed may be reduced due to image quality adjustment.
Output resolution: 1,200 x 2,400 dpi, 1,200 x 1,200 dpi
Data processing resolution:
Standard: 600 x 600 dpi, Fine: 600 x 600 dpi, Superfine: 1,200 x 1,200 dpi
* : When printing in high quality or high resolution mode, printing speed may be reduced.
Standard
Optional
Ethernet (standard):
TCP/IP (lpd, IPP, Port9100, WSD, ThinPrint
Parallel (optional):
Compatible, Nibble, ECP
Note
• The performance may be reduced depending on the paper type and/
or the paper tray.
: PCL6, PCL5
: Adobe® PostScript® 3
• WSD stands for Web Services on Devices.
*
]
TM
®
)
*