Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 710

Hide thumbs Also See for ApeosPort-V C6676:

Table of Contents

Extended Settings

Active palette

Sets the default paper size. Only available when [Paper tray] is set to [Auto] or

[Tray 5]. Only cut sheet can be set.

[4] (Default)

[101] (Default) : A Size

Important • When Trays 1 to 4, Tray 6 is selected, [Paper size] cannot be set. The paper

size loaded in the specified tray is displayed.

• If [A Size] or [Auto] is selected, the settings become as follows:

- When [Document size] is set to other than [Auto], [Paper size] is set to

- When Trays 1 to 4, Tray 6 is selected, the paper size is determined by the

- Depending on the combination of [Document size] and [Paper size], [?]

Sets the paper tray to be used for printing.

[0] (Default)

Important • When Trays 1 to 4, Tray 6 is selected, the paper size is determined by the

size of paper loaded in the tray, and thus [Paper size] cannot be set.

• When [Auto] is selected and paper of the same size in the same orientation

in multiple trays is loaded, paper will be fed in the order of Tray 1  Tray 2

 Tray 3  Tray 4  Tray 6. If paper of the same size is loaded in multiple

trays but in different orientations, feeding of the paper loaded in the

landscape orientation is prioritized.

Sets the paper orientation for printing.

[0] (Default)

Sets the color mode.

[1] (Default)

Selects whether to perform auto layout of the document or not.

[0] (Default)

Selects whether to use a pen specified by command or set on the panel.

[0] (Default)

size of paper loaded in the tray, and thus [Paper size] cannot be set.

may be displayed for the magnification. In this case, the document is

printed at a scale of 100%.

: Tray 6 (HCF B1)

Chapters

Table of Contents