Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 466

15 Problem Solving
White areas or
white or colored
stripes appear.
The entire output
is faint.
Paper becomes
wrinkled.
Text is blurred.
15
466
Symptom
The machine interior (LED
printheads) may be soiled.
The paper is damp.
The paper is unsuitable.
When Tray 5 is used, the size
and type of the loaded paper
are different from the
settings on the print driver.
Two or more sheets may be
fed simultaneously.
The paper is unsuitable.
Paper has been added to the
paper loaded.
The paper is damp.
The paper is unsuitable.
Paper has been added to the
paper loaded.
The paper is damp.
Cause
Clean the interior.
Refer to "Cleaning the Interior (LED Printheads)"
(P.100).
Replace the paper with new one.
Refer to "Loading Paper" (P.60).
Load suitable paper.
Refer to "Loading Paper" (P.60).
Load paper of the correct type and size into
Tray 5.
Refer to "Loading Paper in Tray 5 (Bypass Tray)" (P.63).
Fan the paper well and load it again.
Refer to "Loading Paper" (P.60).
Replace the paper with new one.
Refer to "Loading Paper" (P.60).
Replace the paper with new one.
Refer to "Loading Paper" (P.60).
Remedy