Set the passcode after setting the system administrator's user ID. You can set the passcode
from 4 to 12 characters.
For more information about [Passcode Entry for Control Panel Login], refer to "Passcode Policy" (P.328).
1
Select [System Administrator's Passcode].
2
Select [New Passcode].
3
Enter a new passcode (4 to 12 digits) using the
keyboard displayed, and then select [Save].
Note
4
Select [Retype Passcode], enter the same
passcode, and then select [Save].
5
Select [Save].
6
A confirmation window appears. Select [Yes] to confirm your entry.
Authentication
In [Authentication], you can set the following items.
The following shows the reference section for each setting.
Login Type......................................................................................................................................................................................323
Access Control...............................................................................................................................................................................324
Create/View User Accounts .......................................................................................................................................................325
Reset User Accounts ....................................................................................................................................................................325
Create Authorization Groups.....................................................................................................................................................325
User Details Setup........................................................................................................................................................................326
Passcode Policy .............................................................................................................................................................................328
Charge/Private Print Settings....................................................................................................................................................329
Receive Control .............................................................................................................................................................................329
Login Type
Allows you to select a type of authentication.
No Login Required
Does not use the Authentication feature.
Login to Local Accounts
Authenticates users based on the user information registered on the machine.
Note
Login to Remote Accounts (ApeosPort Series Models Only)
Authenticates users based on the user information registered on a remote authentication
server.
Note
• If no passcode is set, leave the text boxes
blank and select [Save].
• When [Login to Local Accounts] is selected, the machine enters the Login mode and [Login] is
displayed at the lower left of the Services Home screen.
• When [Login to Remote Accounts] is selected, the machine enters the Login mode and [Login] is
displayed at the lower left of the Services Home screen.
Authentication/Security Settings
323
5