Job Flow Service Settings (Apeosport Series Models Only) - Fuji Xerox ApeosPort-V C6676 Administrator's Manual

5 Tools

Job Flow Service Settings (ApeosPort Series Models Only)

In [Job Flow Service Settings], you can configure the settings related to the Job Flow. The
Job Flow is a function to perform a series of jobs registered.
Also, in [Job Flow Service Settings], you can configure a pool server. As for [Pool Server], [Pool
Server Login Method], and [Job Flow Sheet List Default], however, leave the default settings
unchanged because a pool server is not available for the machine.
You can select a resolution in [Fax Transfer Resolution] when you transfer a scanned
document as a fax.
Pool Server
Leave the default setting unchanged.
Pool Server Login Method
Leave the default setting unchanged.
Job Flow Sheet List Default
Set the default values for [Save in], [Owner], and [Target] of Job flow sheets which are
displayed when you select [Job Flow Sheets] on the Services Home screen.
 Save in
5
Leave the default setting unchanged.
 Owner
Select the owner of job flow sheets from administrator and non-system administrator to
filter.
Note
 Target
Select the target of job flow sheets from Scan Jobs, External Application, and Copy to filter.
Fax Transfer Resolution
Select the resolution setting when you send a color document as a fax using the Job Flow
feature.
 Same Resolution (High Quality)
Converts color images to black and white images on a document with the same resolution
when the document is transferred as a fax. Conversion of high resolution color images will
take longer.
 200 dpi (High Speed)
Converts color images to black and white images of 200 dpi on a document when the
document is transferred as a fax.
Reduces the time when converting color images of 300 dpi or higher to black and white
images. 200 dpi is equivalent to [Fine] in fax transmission.
280
• When the machine is in the Authentication mode, select the owner from Shared or Personal.