Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 268

Hide thumbs Also See for ApeosPort-V C6676:
Table of Contents

Advertisement

5 Tools
 Service
Specify the priority of classifying method when [Dial-In], [Caller ID], and [G3ID] are
informed at the same time. [Dial-In] is set as the factory default value.
 Telephone Number / G3 ID
Enter a telephone number to be classified up to 20 digits with the numeric keypad. When
you use * (wild card), the machine checks the telephone number from the first digit. For
example, when you enter "03*", the documents sent from the telephone numbers beginning
with "03" are stored to the specified folder.
When you do not use * (wild card), the machine checks the G3 ID and telephone number
from the last digit. For example, when you enter "1234", the documents sent from the
telephone numbers of which last four digits are "1234" are stored to the specified folder.
Important • * (wild card) cannot be entered as the first digit.
Note
 Folder Number
Enter a 3 digits folder number with the numeric keypad. The documents are stored to the
specified folder.
4
Edit settings and select [Save].
5
Repeat step 3 to 4 as necessary.
5
6
Select [Save].
Folder Selector Setup
If you set the classification by line type, the machine classifies the received documents by
line type and store them in the folders specified.
Note
1
Select [Folder Selector Setup].
2
Select the line to register, and then select
[Change Settings].
Note
3
Select [On].
4
Enter the folder number (three digits) where you want to store the faxes with the numeric
keypad.
5
Select [Save].
268
• The machine checks the folder selector in ascending order. So we recommend you to register
specific telephone number on smaller folder selector numbers to have intended result of the
classifying.
• You can assign folders specified to each line to the service buttons on the Services Home screen. The
number of documents in the folder is displayed on the assigned service button. Pressing the button
allows you to confirm the documents in the folder. For more information, refer to "Customizing the
Button Layout" (P.31).
• The displayed items may vary depending on
the options installed.

Advertisement

Table of Contents
loading

Table of Contents