Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 487

Symptom
The image is too The scan density is set to
dark, or too light. [Darken] or [Lighten].
The setting for [Original Type]
is inappropriate for the
document.
Part of the image The document is pasted or
is missing. folded.
The image is not The document glass or the
the desired size. document cover is dirty.
The document is a
transparent type such as a
transparency film.
The document is misaligned.
The document guides on the
document feeder are not set
in the correct positions.
The document is a non-
standard size.
The document is folded.
The image is not [Color Scanning] is set to
scanned in color. [Black & White], or
[Grayscale].
The image is The resolution is too low.
coarse.
Image is saved with high
compression.
Black-and-white [Black & White] is selected for
gradation is not [Color Scanning].
reproduced
properly.
Cause
Adjust the scan density.
Refer to "5 Scan" > "Advanced Settings" in the User
Guide.
Select the image quality appropriate for the
document.
Refer to "5 Scan" > "Advanced Settings" in the User
Guide.
The pasted or folded section may not be
laying flat on the document glass. Place a
stack of white sheets on top of the document
to flatten the document against the
document glass.
Clean the document glass or the document
cover.
Refer to "Cleaning the Document Cover and Document
Glass (for Duplex Automatic Document Feeder B1-C)"
(P.102) or "Cleaning Document Cover and Document
Glass (for Duplex Automatic Document Feeder B1-PC)"
(P.103).
Place a white sheet of paper on top of the
document when scanning.
Load the document correctly.
Refer to "5 Scan" > "Scanning Procedure" in the User
Guide.
Load the document correctly, and align the
document guides to the document.
Refer to "5 Scan" > "Scanning Procedure" in the User
Guide.
Specify the document size.
Refer to "5 Scan" > "Scanning Procedure" in the User
Guide.
Flatten the curl and load the document
again.
Refer to "5 Scan" > "Scanning Procedure" in the User
Guide.
Set [Color Scanning] to [Color].
Refer to "5 Scan" > "E-mail" in the User Guide.
Set the resolution higher.
Refer to "5 Scan" > "Layout Adjustment" in the User
Guide.
Select a lower compression ratio in [Quality/
File Size].
Refer to "5 Scan" > "E-mail Options/Filing Options" in
the User Guide.
Set [Color Scanning] to [Grayscale].
Refer to "5 Scan" > "E-mail" in the User Guide.
Trouble during Scanning
Remedy
487
15