Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 91

• The 50 sheets staple cartridge can not be set to the C3 Finisher Staple Unit 65 Sheets (optional). If
you use the C3 Finisher Staple Unit 65 Sheets (optional), order the staple cartridge for 65 sheets
staple.
• To order a staple cartridge, contact our Customer Support Center.
1
Make sure that the machine is not operating,
and open the finisher front door.
2
With grasping the lever [R1] of the staple
cartridge holder, pull the holder to the right,
towards you.
3
With grasping the orange lever, pull out the
staple cartridge.
Note • The staple cartridge is firmly inserted. A slight
force is required to pull the cartridge out of
the finisher.
• When the C3 Finisher Staple Unit 65 Sheets is
installed, pull down the orange lever, and pull
out the staple cartridge.
4
Pinch both sides of the empty staple case with
your fingers (1), and pull out the staple case
from the cartridge (2).
Important • The staple case cannot be removed when the
staples are remained in the staple case.
Forcibly removing the staple case may cause
machine malfunction.
Replacing Consumables
2
1
1
3
91