Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 658

16 Appendix
 C3 Finisher with Booklet Maker (optional)
Type
Paper Size
Paper Weight
Stacker Capacity
Staple
16
658
Output tray x 1 : Sorting/Stacking
Finisher tray x 1 : Sorting (Offset available)
Stacking (Offset available)
Booklet tray x 1 : Sorting/Stacking
Output tray
Maximum : 12 x 19" (305 x 483 mm)
Minimum : Postcard
Finisher tray
Maximum : 12 x 19" (305 x 483 mm)
Minimum : B5
Booklet tray
Maximum : 12 x 18" (305 x 457 mm)
Minimum : B5
Output tray : 52 - 300 gsm
Finisher tray : 52 - 300 gsm
Booklet tray : 60 to 105 gsm
*1 : 52 - 55 gsm output paper may not be aligned properly.
*2 : Cover sheets can be up to 256 gsm.
Output tray : 500 sheets (A4)
Finisher tray - Unstapled sheets
A4 : 1,500 sheets
B4 or larger : 1,500 sheets
*1
Mixed size : 300 sheets
Finisher tray - Stapled sheets
A4 : 200 sets or 1,500 sheets
B4 or larger : 100 sets or 1,500 sheets
*1
Mixed size : 70 sets or 200 sheets
Booklet tray : 20 sets
*1 : With paper of a larger size delivered on paper of a smaller size.
*2 : This number may vary depending on the conditions.
Important • When using P paper.
Capability : 50 sheets
Note • When the C3 Finisher Staple Unit 65 Sheets (optional) is installed, at
the maximum of 65 sheets can be stapled. Depending on the paper
type, copies may not be aligned or stapled properly.
• When using with Folder Unit CD1, Z-fold sheets can be stapled;
however, since one Z-fold sheet of A3 or 11 x 17" paper becomes the
same in thickness as 10 sheets of unfold paper, the maximum number
of Z-fold sheets of A3 or 11 x 17" paper that can be stapled is reduced.
When converted into unfold sheets of paper that can be stapled, one
Z-fold sheet of A3 or 11 x 17" paper is equivalent to 10 sheets of
unfold paper and one Z-fold sheet of other size of paper is equivalent
to 20 sheets of unfold paper.
If the curl in the paper is very strong, the output paper may not be
stapled properly.
Paper size : Maximum: A3, 11 x 17", Minimum: B5
Position : 1 position or 2 positions
Important • When using P paper
*1
*1
*2
*2