Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 506

15 Problem Solving
Error Code
016-403 [Cause]
016-404
[Remedy] Confirm the authentication server and store the root certificate of the server certificate
016-405 [Cause]
[Remedy] Initialize the certificate.
For more information on initializing certificates, refer to "Delete All Certificates/Initialize Settings" (P.178).
016-406 [Cause]
[Remedy] Take one of the following measures:
016-407 [Cause]
016-408
016-409
[Remedy] Modify the customized program and install it again.
016-410
016-411
016-412
016-427
[Cause]
[Remedy] Confirm and correctly enter the user name or password in the setting of Ethernet2.
016-428 [Cause]
[Remedy] Set the authentication method of the machine to the same method as set for the
016-429 [Cause]
[Remedy] Confirm the network connection of Ethernet2 and switch setting of the authentication
016-431 [Cause]
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
016-432 [Cause]
[Remedy] Take one of the following measures:
15
016-450 [Cause]
[Remedy] Change the host name.
Refer to "Host Name" (P.224).
016-453 [Cause]
[Remedy] Check whether the IP address of the DNS server is set correctly.
506
Cause and Remedy
The root certificate of Ethernet1 did not match.
of the authentication server into the machine.
If you cannot acquire the root certificate of the server certificate, set [Server Certificate
Verification] of [IEEE 802.1X Settings] for Ethernet1 to [Disabled] on the touch screen.
An error occurred in the certificate stored in the machine.
An error occurred in the SSL client certificate.
1)Store an SSL client certificate in the machine, and set it as the SSL client certificate.
2)If an SSL client certificate cannot be set on the machine, select an option other than
[EAP-TLS] in [Authentication Method].
After automatically obtained the IP address, the machine failed to retrieve proxy server
settings from the DHCP server.
The user name or password for 802.1x authentication did not match in the setting of
Ethernet2.
If the error still is not resolved, check whether the network environment is set correctly.
The 802.1x authentication method cannot be processed in the setting of Ethernet2.
authentication server in the setting of Ethernet2.
The authentication connection of Ethernet2 timed out.
device physically connected to the machine via a network, and check whether it is
connected to the machine correctly.
An internal error occurred.
Support Center.
An error occurred in the SSL client certificate of Ethernet2.

Store an SSL client certificate in the machine to set the SSL client certificate.

If an SSL client certificate cannot be set on the machine, select an option other than
[EAP-TLS] in [Authentication Method].
The SMB host name already exists.
Updating of the IPv6 address and host name for the DNS server failed.