Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 459

Symptom
Unable to insert Did you open a cover or turn
or remove a paper the machine off during
tray. printing?
Unable to copy Is the document glass or the
with the specified document cover dirty?
size.
Is the document a
transparent type such as a
transparency film?
Is the document in the correct
position?
Is the document loaded
correctly?
Are the document guides on
the document feeder set in
the correct positions?
Is the document folded?
Is the document a non-
standard size?
Cause
Do not forcibly insert or remove the paper
tray. Switch off the power. In a few seconds,
switch on the power. When the machine is
ready to receive data, insert or remove the
paper tray.
Clean the document glass and the document
cover.
Refer to "Cleaning the Document Cover and Document
Glass (for Duplex Automatic Document Feeder B1-C)"
(P.102).
Place the document on the document glass,
and place a white sheet on top of the
document when copying.
Load the document correctly.
Refer to "3 Copy" > "Copying Procedure" in the User
Guide.
Adjust the document guide positions.
Refer to "3 Copy" > "Copying Procedure" in the User
Guide.
Unfold and correctly load the document.
Refer to "3 Copy" > "Copying Procedure" in the User
Guide.
Specify the document size.
Refer to "3 Copy" > "Copying Procedure" in the User
Guide.
Machine Trouble
Remedy
459
15