Table of Contents
Advertisement
Printable Area
This section describes the area on paper that can be printed.
Standard Printable Area
The standard printable area is the area of a sheet of paper excluding the 4.0 mm margins
on all four edges of paper. For SRA3 paper (width of 320 mm), the printable area of the
paper is the area excluding the 11.5 mm left and right margins. The actual printable area,
however, may vary depending on the printer (plotter) control language.
Extended Printable Area
When you select the extended printable area setting for printing, you can expand the width
and length of the printable area to 305.0 x 1,194 mm and the print assured area to 297.0 x
476.6 mm. For copying, the printable area and the print assured area can be extended up to
297.0 x 432.0 mm. The area of paper you can print to, however, may vary depending on the
size of paper.
Note
For more information on the setting method on the print driver, refer to the help provided for the print driver. For more
information on the setting on the control panel, refer to "Print Area" (P.245).
When the paper width is
less than 12 inches (A3)
Unprintable area
Paper feed direction
Unprintable area
Paper feed direction
• To extend the printable area, change the PCL print driver setting, or the [Print Area] setting on the
touch screen.
When the paper width is
4mm
Printable area/
Guaranteed
2mm
2mm
print area
2mm
Paper feed direction
4mm
Printable area/
Guaranteed
2mm
2mm
print area
2mm
Paper feed direction
12 inches
(12 x 19")
Unprintable area
4mm
Printable area/
Guaranteed
3.9mm
3.9mm
print area
2mm
Paper feed direction
Unprintable area
25.3mm
Printable area/
Guaranteed
3.9mm
3.9mm
print area
25.3mm
Paper feed direction
Printable Area
When the paper width is
12.6 inches
(SRA3 (320 mm width))
Unprintable area
4mm
11.5mm
11.5mm
Guaranteed
print area
7.5mm
7.5mm
Printable area
2mm
Unprintable area
9mm
Printable area/
Guaranteed
11.5mm
11.5mm
print area
9mm
661
16
Advertisement
Chapters
Table of Contents
