Fuji Xerox ApeosPort-V C6676 Administrator's Manual page 580

15 Problem Solving
Error Code
033-728 [Cause]
[Remedy] No measure is required. The machine will automatically start the auto print job after
033-731 [Cause]
[Remedy] The auto print processing of the received fax document was interrupted by a manual
033-732
[Cause]
[Remedy] This is an error occurring during maintenance work by Fuji Xerox. No measure is
033-733 [Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
033-734
[Cause]
[Remedy] No measure is required.
033-735 [Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
033-736 [Cause]
[Remedy] No measure is required.
033-737
[Cause]
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
033-738 [Cause]
[Remedy] No measure is required.
033-740
[Cause]
[Remedy] No measure is required.
033-741 [Cause]
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
033-742
[Cause]
[Remedy] If this error was caused when using Manual Send, connect the line after storing the
15
033-743
[Cause]
033-744
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
033-745
033-746
033-747
[Cause]
[Remedy] No measure is required.
580
Cause and Remedy
The auto print formatting of the received fax document was interrupted by a manual
print operation.
manual printing completes.
The printing of the received fax document was interrupted.
print operation. No measure is required.
An error occurred while connecting to the EP system.
required.
An error occurred during fax transmission.
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
Because a report job was instructed while preparing to print a received fax, the printing
of the received fax is temporarily suspended.
An error occurred during fax transmission.
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
The forwarding job was interrupted because the data volume exceeded the upper limit.
An error occurred during fax transmission.
Support Center.
Received abnormal JBIG data.
The printing of the received fax document was interrupted.
An error occurred during fax transmission.
Support Center.
An error occurred during fax transmission. This error may occur if the remaining
capacity of the machine's memory is 10% or less and Manual Send is used.
document, and then send. If the error still is not resolved, delete unnecessary data from
the hard disk to free up disk space, and execute the operation again.
If the error persists, contact our Customer Support Center.
An error occurred during fax transmission.
on the machine power. Try again. If the error still is not resolved, contact our Customer
Support Center.
The job is temporarily suspended.