Delete Form; Other Settings - Fuji Xerox DocuCentre-IV C2260 Administrator's Manual

5 Tools
Receiving Buffer - EtherTalk
Set the EtherTalk receiving buffer.
Specify a value from 1024 to 2048 KB in 32 KB increments.
Receiving Buffer - Port 9100
Set the Port 9100 receiving buffer.
Specify a value from 64 to 1024 KB in 32 KB increments.

Delete Form

You can delete registered ESC/P-K forms.
1
Select [Delete Form].
2
Select the print mode to delete forms.
ESC/P
Deletes ESC/P-K emulation forms.
5
Form Number
When you select an item to delete, you can enter the form number.
Form Name
After you enter the form number and select [Confirm], the form name matching the form
number entered appears.
3
Enter the form number with the numeric keypad, and select [Confirm].
4
Check the form name, and then select [Delete Data].

Other Settings

You can configure other settings related to the paper used in the printer.
Print Area
Set whether or not to expand the print area.
For more information about the printable area, refer to "Printable Area" (P.517).
For more information on the extended printable area, refer to "Extended Printable Area" (P.517).
Substitute Tray
When there is no tray containing the paper size selected by the Auto Paper selection, select
whether or not to print with paper loaded in another paper tray. In the event of using a
substitute tray, select the paper size from [Use Larger Size], [Use Closest Size], or [Select
Tray 5].
Note
Display Message
Does not use a substitute tray, but displays a paper loading message.
188
• When documents are printed using emulation such as ESC/P-K and HP-GL/2, the substitute
tray setting is not valid and a message prompting you to load paper displayed on the screen.