Honda 2005-2008 RX500 FA Service Manual page 75

'61HN252' by American Honda Motor Co. - Page 75 of 540
[2005-2008] [TRX500 FA/FGA]
Failure to properly
tighten the band
screw will allow the
air cleaner element
engine damage
1 of 1
Remove the dust cover and clean it with com-
pressed air if it is dirty.
Install the dust cover in position.
Wash the element and filter in non-flammable or
high flash point solvent.
Squeeze out the solvent thoroughly, and allow the
element and filter to dry.
Apply approximately 20 g (0.7 oz) of Pro Honda
Foam Filter Oil or equivalent oil from the inside of
the element.
Place the element into a plastic bag and spread the
oil evenly by hand.
Install the clip and sub-air cleaner filter.
Install the element core into the air cleaner element
properly.
Install the element band onto the air cleaner ele-
ment and the element assembly over the connect-
ing hose.
to fall off and
could result.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
DUST COVER
Wash
PRO HONDA FOAM FILTER OIL
CORE
BAND
MAINTENANCE
Squeeze out
PLASTIC BAG
ELEMENT
CLIP
SUB-AIR
CLEANER
FILTER
3-7
3/9/2008 10:38 PM