Honda 2005-2008 RX500 FA Service Manual page 503

'61HN252' by American Honda Motor Co. - Page 503 of 540
[2005-2008] [TRX500 FA/FGA]
1 of 1
PROBLEM CODE 6: ANGLE SENSOR
SYSTEM (AUTOMATIC TRANSMIS-
SION SWASH PLATE ANGLE)
1. Angle Sensor Connection Inspection
Check for loose or poor contact on the ECM 21P
(Gray) connector.
Check for loose or poor contact on the angle sen-
sor 3P (Black) connector.
Is there normal condition?
Loose or poor contact on the ECM con-
NO
nector and the angle sensor connector
GO TO STEP 2.
YES
2. Angle Sensor Resistance Inspection 1
Turn the ignition switch OFF.
Disconnect the ECM 21P (Gray) connector.
Measure the angle sensor resistance at the ECM
21P (Gray) connector.
Connection: Black/red (+) Green/yellow()
Is the resistance within 1.6 2.4 kΩ (20°C/68°F)?
GO TO STEP 3.
NO
GO TO STEP 4.
YES
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
ECM 21P (GRAY) CONNECTOR
'05, '06 shown:
HONDAMATIC
3P (BLACK) CONNECTOR
G/Y
Bl/R
24-25
3/9/2008 11:29 PM