Honda 2005-2008 RX500 FA Service Manual page 153

'61HN252' by American Honda Motor Co. - Page 153 of 540
[2005-2008] [TRX500 FA/FGA]
SERVICE INFORMATION
GENERAL
· When removing/installing the engine, tape the frame around the engine beforehand to protect the frame.
· The following components require engine removal for service:
sub-transmission
crankshaft and automatic transmission
SPECIFICATIONS
Engine dry weight
Engine oil capacity
TORQUE VALUES
Left lower engine hanger bracket
bolt
Lower engine hanger nut
Upper engine hanger bracket bolt
Engine oil temperature (EOT) sensor
Gearshift lever linkage arm pivot
bolt
Differential case mounting bolt
Differential case mounting bracket
bolt
Differential mounting nut
Differential mounting nut
1 of 1
(page 12-12)
(page 13-8)
ITEM
After draining
After draining/filter
change
After disassembly
(left and right)
(frame side)
(engine side)
(10 mm)
(8 mm)
(10 mm)
(8 mm)
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
ENGINE REMOVAL/INSTALLATION
SPECIFICATIONS
62.9 kg (138.7 lbs)
4.4 liters (4.7 US qt, 3.9 lmp qt)
4.6 liters (4.9 US qt, 4.0 lmp qt)
5.2 liters (5.5 US qt, 4.6 lmp qt)
32 N·m (3.3 kgf·m, 24 lbf·ft)
54 N·m (5.5 kgf·m, 40 lbf·ft)
54 N·m (5.5 kgf·m, 40 lbf·ft)
32 N·m (3.3 kgf·m, 24 lbf·ft)
18 N·m (1.8 kgf·m, 13 lbf·ft)
27 N·m (2.8 kgf·m, 20 lbf·ft)
44 N·m (4.5 kgf·m, 33 lbf·ft)
22 N·m (2.2 kgf·m, 16 lbf·ft)
44 N·m (4.5 kgf·m, 33 lbf·ft)
22 N·m (2.2 kgf·m, 16 lbf·ft)
Apply locking agent to
the threads
Lock nut: replace with a
new one
7-3
3/9/2008 10:48 PM