Honda 2005-2008 RX500 FA Service Manual page 110

'61HN252' by American Honda Motor Co. - Page 110 of 540
[2005-2008] [TRX500 FA/FGA]
LUBRICATION SYSTEM
4-16
1 of 1
Install the pump spacer.
Install the drive pin and inner rotor C, aligning the
pin grooves with the drive pin.
Install outer rotor C.
Install the relief valve, spring and spring seat.
Install the pump body C and tighten the three bolts.
INSTALLATION
Coat new O-rings with oil and install it into the
grooves in the front crankcase.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
DRIVE PIN
SPACER
SPRING
OUTER ROTORS C
INNER ROTOR C
SPRING SEAT
RELIEF VALVE
BOLTS
OIL PUMP BODY C
O-RINGS
3/9/2008 10:43 PM