Honda 2005-2008 RX500 FA Service Manual page 109

'61HN252' by American Honda Motor Co. - Page 109 of 540
[2005-2008] [TRX500 FA/FGA]
1 of 1
ASSEMBLY
Dip all parts in clean engine oil.
SPRING
SPRING SEAT
PUMP BODY C
Install the pump shaft into pump body A with the
threaded hole end facing toward pump body A.
Install inner rotor A onto the shaft with the drive pin
grooves facing out.
Install outer rotor A.
Install the drive pin into the pump shaft hole and set
the drive pin in the inner rotor grooves.
Install pump body B.
Install the two dowel pins.
Install the drive pin and inner rotor B, aligning the
pin grooves with the drive pin.
Install outer rotor B.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
PUMP BODY B
RELIEF VALVE
SPACER
INNER ROTORS B
OUTER ROTORS B
INNER ROTORS C
OUTER ROTORS C
LUBRICATION SYSTEM
OUTER ROTORS A PUMP BODY A
PUMP SHAFT
DRIVE PIN
INNER ROTORS A
PUMP BODY A
PUMP SHAFT
INNER AND OUTER ROTORS A
DRIVER PIN
DOWEL PIN
INNER AND OUTER ROTORS B
DOWEL PIN
PUMP BODY B
DRIVER PIN
DOWEL PIN
4-15
3/9/2008 10:43 PM