Honda 2005-2008 RX500 FA Service Manual page 244

'61HN252' by American Honda Motor Co. - Page 244 of 540
[2005-2008] [TRX500 FA/FGA]
SUB-TRANSMISSION/GEARSHIFT LINKAGE
OUTPUT DRIVE GEAR
Do not forget to
install the washer
onto the crankcase
end of the shaft.
12-14
1 of 1
ASSEMBLY
R./L. GEAR SHIFTER
THRUST WASHER
R. GEAR
G. GEAR
D./R. GEAR BUSHING
D. GEAR SHIFTER
Apply molybdenum oil solution to the gear sliding
surface, shifter grooves and bushings.
Assemble the countershaft.
Coat a new O-ring with oil and install it into the
groove in the automatic transmission unit.
Coat the reverse idle gear shaft with molybdenum
oil solution and install it into the crankcase.
Install the washer onto the reverse idle gear shaft.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
L. GEAR BUSHING
L. GEAR
COUNTERSHAFT
COUNTERSHAFT ASSEMBLY
WASHER
REVERSE IDLE
GEAR SHAFT
O-RING
3/9/2008 10:59 PM