Honda 2005-2008 RX500 FA Service Manual page 371

'61HN252' by American Honda Motor Co. - Page 371 of 540
[2005-2008] [TRX500 FA/FGA]
Replace the cam
followers as a set
1 of 1
DIFFERENTIAL HOUSING/FACE CAM/CAM
FOLLOWERS
Check the sliding surface and grooves of the hous-
ing for damage or discoloration.
Check the shim, face cams and followers for dam-
age.
(12 pieces).
Temporarily assemble the differential housing, face
cams and cam followers (page 17-29).
Measure the height of the face cam from the hous-
ing mating surface as shown while applying a load
of 1.47 kN (150 kgf) to the face cam boss using a
hydraulic press.
SERVICE LIMIT: 3.3 mm (0.13 in)
If the height is smaller than the service limit, replace
the differential as an assembly.
SIDE CONE SPRING
Check the cone spring for damage.
Measure the height of the cone spring.
SERVICE LIMIT: 2.6 mm (0.10 in)
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
FRONT DRIVING MECHANISM
DIFFERENTIAL HOUSING
FACE CAM
1.47 kN (150 kgf)
CAM FOLLOWERS
17-23
3/9/2008 11:14 PM