Honda 2005-2008 RX500 FA Service Manual page 494

'61HN252' by American Honda Motor Co. - Page 494 of 540
[2005-2008] [TRX500 FA/FGA]
HONDAMATIC
24-16
1 of 1
8. System Failure Reproduction
Connect all connectors.
Test-drive the vehicle under the following condi-
tions:
Gearshift lever in D range
Mode select switch at ESP/1st
Driving for 2 seconds or more at over 7 mph
of vehicle speed
Is problem code 2 indicated?
NO · No problem (Temporary failure)
· Erase the problem code (page 24-9)
Faulty ECM After replacement, per-
YES
form initial setting procedure
6)
PROBLEM CODE 3: GEAR POSITION
SWITCH SYSTEM
1. Gear Position Switch Connection Inspection
Check for loose or poor contact on the ECM 21P
(Gray) connector.
Check for loose or poor contact on the junction
box.
Is the connection normal?
Loose or poor contact on the ECM 21P
NO
(Gray) connector and the junction box
YES GO TO STEP 2.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
GEAR POSITION INDICATOR
(page 24-
'05, '06 shown:
ECM 21P (GRAY) CONNECTOR
JUNCTION BOX
3/9/2008 11:28 PM