Honda 2005-2008 RX500 FA Service Manual page 201

'61HN252' by American Honda Motor Co. - Page 201 of 540
[2005-2008] [TRX500 FA/FGA]
SERVICE INFORMATION
GENERAL
· This section covers service of the centrifugal clutch and change clutch. These parts can be serviced with the engine
installed in the frame.
· The automatic transmission unit and engine lubricating oil from the filter is fed through the oil passages in the front
crankcase cover.
· The clutch will not engage properly if the engine oil contains additives such as molybdenum disulfide. Oils with a
molybdenum disulfide additive tend to reduce clutch friction.
· Engine oil viscosity and level and the use of oil additives have an effect on clutch disengagement. Oil additives of any
kind are not recommended. When the clutch does not disengage or the vehicle creeps with the clutch disengaged,
inspect the engine oil viscosity and level before servicing the clutch system.
SPECIFICATIONS
Clutch
Clutch drum boss I.D.
Crankshaft O.D. at clutch drum
TORQUE VALUES
Centrifugal clutch lock nut
Oil feed pipe setting cap
TOOLS
Clutch holder plate
07ZMB-HN20100
Not available in U.S.A.
Outside screw puller, 40 x 1.5 mm
07ZMC-HN20100
or 07ZMC-HN2A100 (U.S.A. only)
1 of 1
ITEM
Drum I.D.
Weight lining thickness
Clutch spring height
Clutch weight spring free length
118 N·m (12.0 kgf·m, 87 lbf·ft)
18 N·m (1.8 kgf·m, 13 lbf·ft)
Clutch holder pin
07ZMB-HN20200
Not available in U.S.A.
Bearing remover, 17 mm
07936-3710300
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
STANDARD
150.0 150.2 (5.906 5.913)
3.0 (0.12)
3.72 (0.146)
23.2 (0.91)
29.000 29.020 (1.1417 1.1425)
28.959 28.980 (1.1401 1.1409)
Replace with a new one
Apply oil to the threads and seating sur-
face
Stake
Clutch holder set
07ZMB-HN20000
or 07ZMB-HN2A100 (U.S.A. only)
Remover handle
07936-3710100
CENTRIFUGAL CLUTCH
Unit: mm (in)
SERVICE LIMIT
150.4 (5.92)
2.0 (0.08)
3.6 (0.14)
24.1 (0.95)
29.05 (1.144)
28.93 (1.139)
10-3
3/9/2008 10:53 PM