Honda 2005-2008 RX500 FA Service Manual page 336

'61HN252' by American Honda Motor Co. - Page 336 of 540
[2005-2008] [TRX500 FA/FGA]
BRAKE SYSTEM
16-18
1 of 1
Install and tighten the brake caliper bolts to the
specified torque.
TORQUE: 23 N·m (2.3 kgf·m, 17 lbf·ft)
INSTALLATION
Install the brake caliper and new mounting bolts.
Tighten the mounting bolts to the specified torque.
TORQUE: 44 N·m (4.5 kgf·m, 33 lbf·ft)
Install the brake hose eyelet to the caliper body with
new sealing washers and oil bolts.
Push the brake hose eyelet to the stopper on the cal-
iper, then tighten the oil bolts to the specified
torque.
TORQUE: 34 N·m (3.5 kgf·m, 25 lbf·ft)
Install the brake splash guard and tighten the bolts.
TORQUE: 11 N·m (1.1 kgf·m, 8 lbf·ft)
Install the front wheel (page 14-12).
Fill and bleed the hydraulic system (page 16-6).
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
CALIPER BOLTS
BRAKE HOSE
OIL BOLT
SPLASH GUARD
MOUNTING BOLTS
SEALING
WASHERS
STOPPER
BOLTS
3/9/2008 11:10 PM