Honda 2005-2008 RX500 FA Service Manual page 223

'61HN252' by American Honda Motor Co. - Page 223 of 540
[2005-2008] [TRX500 FA/FGA]
The cover (stator) is
attracted to the
flywheel, be careful
during removal.
1 of 1
Hold the recoil starter driven pulley using the spe-
cial tool and loosen the bolt.
TOOL:
Recoil pulley holder
Remove the bolt, O-ring and the driven pulley.
Remove the nine bolts, three sealing washer and
alternator cover.
magnetically
Remove the dowel pins and O-ring.
IGNITION PULSE GENERATOR/
STATOR REMOVAL/INSTALLATION
Disconnect the ignition pulse generator connector.
Remove the two bolts and ignition pulse generator.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
ALTERNATOR/STARTER CLUTCH
07SMB-HM70100
O-RING
BOLTS
ALTERNATOR COVER
BOLTS
RECOIL PULLEY HOLDER
DRIVEN PULLEY
BOLT
BOLTS/SEALING
WASHERS
CONNECTOR
IGNITION PULSE
GENERATOR
11-9
3/9/2008 10:56 PM