Honda 2005-2008 RX500 FA Service Manual page 311

'61HN252' by American Honda Motor Co. - Page 311 of 540
[2005-2008] [TRX500 FA/FGA]
1 of 1
INSPECTION
Check the upper pivot bushing for wear or damage.
Check the damper unit for leakage or other damage.
Replace the shock absorber assembly if necessary.
Remove the lower pivot collar.
Check the lower pivot bearing and lower pivot collar
'05, '06:
for wear or damage.
Check the lower pivot bushing for wear or damage.
After '06:
BEARING REPLACEMENT ('05, '06)
Remove the lower pivot collar.
Remove the dust seals.
Press the needle bearing out of the lower pivot
using the special tools.
TOOLS:
Driver shaft
Attachment, 22 x 24 mm
Pilot, 16 mm
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
UPPER PIVOT BUSHING
'05, '06 shown:
PIVOT COLLAR
PIVOT COLLAR
07949-3710001
07746-0010800
ATTACHMENT
07746-0041300
PILOT
REAR WHEEL/SUSPENSION
DUST SEALS
BEARING/BUSHING
DUST SEALS
DRIVER
15-7
3/9/2008 11:08 PM