Honda 2005-2008 RX500 FA Service Manual page 204

'61HN252' by American Honda Motor Co. - Page 204 of 540
[2005-2008] [TRX500 FA/FGA]
CENTRIFUGAL CLUTCH
10-6
1 of 1
Remove the oil joint pipe and O-rings.
BEARING INSPECTION/
REPLACEMENT
Turn the inner race of each bearing with your finger.
The bearing should turn smoothly and quietly.
Also check that the outer race of the bearing fits
tightly in the front crankcase cover.
Replace the bearing if the inner race does not turn
smoothly, quietly, or if the outer race fits loosely in
the front crankcase cover.
Remove the crankshaft bearing using special tools.
TOOLS:
Bearing remover, 17 mm 07936-3710300
Remover handle 07936-3710100
Remover weight 07741-0010201 or
07936-371020A or
07936-3710200
(U.S.A. only)
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
OIL JOINT PIPE/O-RINGS
BEARING
TRANSMISSION BEARINGS
CRANKSHAFT BEARING
CRANKSHAFT BEARING
REMOVER WEIGHT
BEARING REMOVER
O-RING
3/9/2008 10:53 PM