Honda 2005-2008 RX500 FA Service Manual page 277

'61HN252' by American Honda Motor Co. - Page 277 of 540
[2005-2008] [TRX500 FA/FGA]
Allow the adhesive
to dry for an hour
1 of 1
Install the handlebar front cover and tighten the two
nuts.
Install the handlebar upper cover and tighten the
screw.
Apply Honda Bond A or Honda Hand Grip Cement
(U.S.A. only) to the inside surfaces of the handlebar
grips and to the clean surfaces of the handlebar.
Wait 3--5 minutes and install the grip. Rotate the
grip for even application of the adhesive.
before using.
Install the grip ends and tighten the bolts.
Install the choke knob and tighten the nut.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
FRONT WHEEL/SUSPENSION/STEERING
HANDLEBAR FRONT COVER
SCREW
HANDLEBAR GRIP
NUTS
HANDLEBAR UPPER COVER
BOLT
GRIP END
CHOKE KNOB
NUT
14-9
3/9/2008 11:03 PM