Honda 2005-2008 RX500 FA Service Manual page 108

'61HN252' by American Honda Motor Co. - Page 108 of 540
[2005-2008] [TRX500 FA/FGA]
LUBRICATION SYSTEM
4-14
1 of 1
Separate oil pump bodies A and B.
Remove the outer, inner rotors A, drive pin and
pump shaft.
Clean the all disassembled parts thoroughly.
INSPECTION
Temporarily assemble each inner rotor, outer rotor
and drive pin onto the pump shaft, and install them
into each pump body individually.
Measure the rotor tip clearance.
SERVICE LIMIT: 0.20 mm (0.008 in)
Measure the pump body clearance.
SERVICE LIMIT: 0.25 mm (0.010 in)
Measure the pump side clearance.
SERVICE LIMIT: 0.11 mm (0.004 in)
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
PUMP BODY A
INNER AND OUTER ROTORS A
PUMP SHAFT
PUMP BODY B
3/9/2008 10:43 PM