Honda 2005-2008 RX500 FA Service Manual page 344

'61HN252' by American Honda Motor Co. - Page 344 of 540
[2005-2008] [TRX500 FA/FGA]
BRAKE SYSTEM
16-26
1 of 1
Install the new cotter pins and secure the setting
plate as shown.
Install the joint pins into the brake arm, then install
the brake cables and springs.
Install the adjusting nuts.
BRAKE DRUM INSTALLATION
Apply molybdenum disulfide grease to the axle
splines and install the brake drum.
Apply grease to a new O-ring and install it onto the
brake panel groove.
Install the brake drum cover and tighten the bolts.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
SPRINGS
BRAKE CABLES
BRAKE DRUM
BOLTS
BRAKE DRUM COVER
COTTER PINS
SETTING PLATE
JOINT PINS
ADJUSTING NUTS
O-RING
3/9/2008 11:11 PM