'61HN252' by American Honda Motor Co. - Page 346 of 540
[2005-2008] [TRX500 FA/FGA]
BRAKE SYSTEM
16-28
1 of 1
Disconnect the brake cable.
Unhook the brake pedal return spring.
Remove the cotter pin and washer from the pedal
pivot shaft, then remove the brake pedal from the
shaft.
Remove the dust seals.
INSTALLATION
Apply grease to the brake pedal pivot shaft sliding
surface and dust seal lips.
Install the brake pedal onto the pivot shaft.
Install the washer and secure the brake pedal with a
new cotter pin.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
BRAKE CABLE
WASHER
COTTER PIN
BRAKE PEDAL
COTTER PIN
RETURN SPRING
BRAKE PEDAL
DUST SEALS
DUST SEALS
WASHER
3/9/2008 11:11 PM