Honda 2005-2008 RX500 FA Service Manual page 197

'61HN252' by American Honda Motor Co. - Page 197 of 540
[2005-2008] [TRX500 FA/FGA]
1 of 1
Remove the sealing bolt and washer from the cam
chain tensioner lifter.
Turn the cam chain tensioner lifter shaft clockwise
fully to retract the tensioner lifter and secure it with
a stopper tool.
TOOL:
Cam chain tensioner stopper 07NMG-MY90101 or
07ZMG-MCAA400
(U.S.A. only)
Install the cam chain tensioner lifter into the cylin-
der with a new gasket.
Install the camshaft (page 8-17).
Install and tighten the two bolts.
Remove the stopper tool and install the sealing bolt
with a new sealing washer.
Install the cylinder head (page 8-20).
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
GASKET
BOLTS
TENSIONER LIFTER
CYLINDER/PISTON
TENSIONER LIFTER
TENSIONER LIFTER
SEALING WASHER
SEALING BOLT
9-11
3/9/2008 10:52 PM