Honda 2005-2008 RX500 FA Service Manual page 242

'61HN252' by American Honda Motor Co. - Page 242 of 540
[2005-2008] [TRX500 FA/FGA]
SUB-TRANSMISSION/GEARSHIFT LINKAGE
SUB-TRANSMISSION
12-12
1 of 1
Install the output shaft into the crankcase and the
output driven gear onto the shaft with the large
raised side facing out.
Install the rear crankcase cover (page 12-6).
DISASSEMBLY
Remove the shift fork shaft and shift forks (page 12-
8).
Remove the washers from the countershaft and
reverse idle shaft.
Pull out the mainshaft from the automatic transmis-
sion unit.
Remove the countershaft assembly and reverse idle
gear as a set.
Remove the reverse idle gear shaft and washer.
Remove the O-ring from the automatic transmission
unit.
Disassemble the countershaft.
Clean all disassemble parts in solvent thoroughly.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
OUTPUT SHAFT
WASHERS
REVERSE IDLE GEAR
COUNTERSHAFT ASSEMBLY
WASHER
O-RING
REVERSE IDLE
GEAR SHAFT
DRIVEN GEAR
MAINSHAFT
3/9/2008 10:58 PM