Honda 2005-2008 RX500 FA Service Manual page 338

'61HN252' by American Honda Motor Co. - Page 338 of 540
[2005-2008] [TRX500 FA/FGA]
BRAKE SYSTEM
16-20
1 of 1
Check the wheel hub dust seal for wear or damage.
Check the brake drum cover dust seal for wear or
damage.
Drive it out of the drum cover if necessary.
DUST SEAL REPLACEMENT
Remove the dust seal from the wheel hub.
Apply molybdenum disulfide grease to a new seal
lips and install it into the wheel hub with the flat
side facing in until it is fully seated.
Install a new dust seal into the drum cover using the
special tool as shown.
TOOL:
Driver 07749-0010000
Attachment, 78 x 80 mm 07NAD-PX40100
Fill up with grease to the brake drum cover dust seal
lip.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DRIVER
ATTACHMENT
3/9/2008 11:11 PM