'61HN252' by American Honda Motor Co. - Page 123 of 540
[2005-2008] [TRX500 FA/FGA]
1 of 1
Check the diaphragm for holes, deterioration or
damage.
FLOAT CHAMBER
Remove the four screws and the float chamber.
Remove the baffle plate.
Drive out the float pin from the throttle stop screw
side using a pin driver.
Remove the float and float valve.
Check the float for damage or fuel in the float.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
SCREWS
BAFFLE PLATE
PIN DRIVER
FUEL SYSTEM
DIAPHRAGM
FLOAT CHAMBER
FLOAT
FLOAT VALVE
5-11
3/9/2008 10:45 PM