Honda 2005-2008 RX500 FA Service Manual page 67

'61HN252' by American Honda Motor Co. - Page 67 of 540
[2005-2008] [TRX500 FA/FGA]
BREATHER PIPE
JOINT NUTS
1 of 1
INSTALLATION
CLIP
JOINT
GASKET
MUFFLER
EXHAUST PIPE
GASKET
Install the new joint gasket and muffler gasket.
Install the muffler and exhaust pipe in the reverse
order of removal by loosely tightening all fasteners.
Tighten the joint nuts first, then tighten the mount-
ing bolt and band bolts.
Set the breather pipe onto the stay and install the
clip.
TORQUE:
Muffler band bolt: 23 N·m (2·3 kgf·m, 17 lbf·ft)
After installation, inspect the exhaust system for
leaks.
Install the left engine cover and collars by tightening
the bolt and socket bolts.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
FRAME/BODY PANELS/EXHAUST SYSTEM
STAY
BAND BOLTS
COLLAR
SEAT RUBBERS
MOUNTING BOLT
WASHERS
LEFT ENGINE SIDE COVER
COLLARS
MUFFLER
BOLT
SOCKET BOLTS
2-17
3/9/2008 10:36 PM