Honda 2005-2008 RX500 FA Service Manual page 276

'61HN252' by American Honda Motor Co. - Page 276 of 540
[2005-2008] [TRX500 FA/FGA]
FRONT WHEEL/SUSPENSION/STEERING
14-8
1 of 1
two bolts
handlebar rear cover
four bolts
handlebar upper holders
handlebar
INSTALLATION
Place the handlebar onto the lower holders and
align the punch mark on the handlebar with the top
of the lower holder.
Install the upper holders with the bolt holes facing
forward.
Install the four bolts and tighten the front bolts first,
then tighten the rear bolts.
Install the handlebar rear cover and tighten the two
bolts.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
HANDLEBAR REAR COVER
BOLTS
HANDLEBAR
UPPER HOLDERS
BOLTS
BOLT HOLES
HANDLEBAR REAR COVER
BOLTS
HANDLEBAR
PUNCH MARK
BOLTS
3/9/2008 11:02 PM