Honda 2005-2008 RX500 FA Service Manual page 184

'61HN252' by American Honda Motor Co. - Page 184 of 540
[2005-2008] [TRX500 FA/FGA]
CYLINDER HEAD/VALVE/CAMSHAFT
CYLINDER HEAD COVER ASSEMBLY/
INSTALLATION
INTAKE ROCKER ARM
8-22
1 of 1
ASSEMBLY
Coat new O-rings with oil and install them onto the
rocker arm shaft grooves.
Apply molybdenum oil solution to the rocker arm
shaft sliding surface.
Install the rocker arms and shafts into the cylinder
head cover.
Align the bolt holes in the cylinder head cover and
rocker arm shaft by turning the shaft.
Install the setting bolts with new sealing washers
and tighten the bolt securely.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
SETTING BOLT
SEALING WASHER
ROCKER ARM SHAFT
EXHAUST ROCKER ARM
ROCKER ARMS AND SHAFTS
SEALING
WASHERS
ROCKER ARM SHAFTS
O-RING
O-RINGS
BOLTS
3/9/2008 10:51 PM