Honda 2005-2008 RX500 FA Service Manual page 260

'61HN252' by American Honda Motor Co. - Page 260 of 540
[2005-2008] [TRX500 FA/FGA]
CRANKSHAFT/AUTOMATIC TRANSMISSION
AUTOMATIC TRANSMISSION UNIT
AND CRANKSHAFT
Be careful not to
damage the
crankcase mating
surface and
crankshaft
assembly.
13-10
1 of 1
AUTOMATIC TRANSMISSION UNIT
REMOVAL
· Do not disassemble the automatic transmission
unit.
Separate the crankcase (page 13-8).
Remove the five mounting bolts and the automatic
transmission unit.
Remove the dowel pin.
CRANKSHAFT AND BALANCER
REMOVAL
Remove the crankshaft and balancer from the rear
crankcase using a hydraulic press. Be sure to hold
the crankshaft and balancer while pressing them
out of the crankcase.
If the rear crankshaft bearing is left on the crank-
shaft, remove it using the bearing puller with a suit-
able protector.
TOOL:
Universal bearing puller 07631-0010000 or
equivalent
commercially
available in U.S.A.
· Always replace the rear crankshaft bearing with a
new one when the crankshaft is removed.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
BOLTS
AUTOMATIC TRANSMISSION UNIT
DOWEL PIN
CRANKSHAFT
BALANCER
BEARING
PULLER
3/9/2008 11:00 PM