Honda 2005-2008 RX500 FA Service Manual page 489

'61HN252' by American Honda Motor Co. - Page 489 of 540
[2005-2008] [TRX500 FA/FGA]
PROBLEM CODE INDEX
1 of 1
Problem
code
1 Ignition pulse generator no signal
2 Rear VSS no signal
3 Gear position (D, L, N, R) circuit multiple ON position (Short)
4 TP sensor output voltage is out of specified value
5 Angle sensor system (Control motor lock)
6 Angle sensor output voltage is out of specified value
7 ESP shift (Up and down) switch circuit malfunction
8 EEPROM malfunction (Writing/Readout circuit)
9 Voltage converter circuit malfunction
10 Fail-safe relay circuit malfunction
11 Control motor driver circuit malfunction
12 CPU (Central Processing Unit) malfunction
13 Mode select (D1, D2 and ESP) switch circuit malfunction
Problem code can not be retrievable
(Same circuit as of code 3 or 7)
Problem can not be detected by ECM
(Faulty gear position or drive mode indication)
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
Detection item
HONDAMATIC
Refer
to
24-12
24-14
24-16
24-18
24-20
24-25
24-27
24-29
24-30
24-30
24-30
24-30
24-32
24-34
24-34
24-11
3/9/2008 11:28 PM