Honda 2005-2008 RX500 FA Service Manual page 498

'61HN252' by American Honda Motor Co. - Page 498 of 540
[2005-2008] [TRX500 FA/FGA]
HONDAMATIC
24-20
1 of 1
8. System Failure Reproduction
Connect all connectors.
Turn the ignition switch ON.
Check the gear position indicator.
Is problem code 4 indicated?
· No problem (Temporary failure)
NO
· Erase the problem code (page 24-9)
YES Faulty ECM After replacement, per-
form initial setting procedure
6)
PROBLEM CODE 5: ANGLE SENSOR
SYSTEM (MOTOR LOCK)
1. Angle Sensor Connection Inspection
Check for loose or poor contact on the ECM 21P
(Gray) and 5P (Black) connectors.
Check for loose or poor contact on the angle sen-
sor 3P connector.
Check for loose or poor contact on the control
motor 2P (Natural) connector.
Is the connection normal?
Loose or poor contact on the ECM con-
NO
nectors, the angle sensor 3P (Black)
connector and the control motor 2P
(Natural) connector
YES GO TO STEP 2.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
GEAR POSITION INDICATOR
(page 24-
'05, '06 shown:
ECM 21P (GRAY) CONNECTOR
3P CONNECTOR
'05, '06 shown:
ECM 5P (BLACK) CONNECTOR
2P (NATURAL) CONNECTOR
3/9/2008 11:28 PM