Honda 2005-2008 RX500 FA Service Manual page 261

'61HN252' by American Honda Motor Co. - Page 261 of 540
[2005-2008] [TRX500 FA/FGA]
1 of 1
INSPECTION
CRANKSHAFT
Set the crankshaft as shown and measure the
runout using a dial indicator.
SERVICE LIMIT: 0.15 mm (0.006 in)
Measure the side clearance between the connecting
rod big end and crank weight with a feeler gauge.
SERVICE LIMIT: 0.8 mm (0.03 in)
Measure the radial clearance at the connecting rod
big end in an X and Y directions.
SERVICE LIMIT: 0.05 mm (0.002 in)
BALANCER
Check the balancer gear for wear or damage.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
CRANKSHAFT/AUTOMATIC TRANSMISSION
6 mm
6 mm
HOLD HOLD
13-11
3/9/2008 11:01 PM