'61HN252' by American Honda Motor Co. - Page 340 of 540
[2005-2008] [TRX500 FA/FGA]
BRAKE SYSTEM
16-22
1 of 1
Remove the brake cam.
Disconnect the breather hose from the brake panel.
Remove the brake panel nuts and discard them.
Remove the brake panel.
Remove the O-ring from the brake panel groove.
BRAKE PANEL BEARING REPLACEMENT
Turn the inner race of the bearing with your finger.
The bearing should turn smoothly and quietly.
Also check that the outer race of the bearing fits
tightly in the brake panel.
Replace it if necessary.
Check the dust seal for wear or damage.
Remove the axle dust seal and brake cam dust seal.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
BRAKE CAM
BREATHER HOSE
BRAKE CAM DUST SEAL
BRAKE PANEL
NUTS
AXLE DUST SEAL
3/9/2008 11:11 PM