Honda 2005-2008 RX500 FA Service Manual page 149

'61HN252' by American Honda Motor Co. - Page 149 of 540
[2005-2008] [TRX500 FA/FGA]
Do not apply oil to
1 of 1
Disconnect the bypass hoses from the water pump.
Remove the three bolts and water pump.
Remove the water joint pipe and O-rings.
DISASSEMBLY/ASSEMBLY
Remove the two bolts and separate the water pump
cover and water pump body.
Remove the O-ring.
Install a new O-ring and assemble the water pump
cover and water pump body.
Install and tighten the two bolts.
INSTALLATION
Install a new O-ring onto the pump side of the water
joint pipe.
the O-rings.
Install a new O-ring onto the engine side of the
water joint pipe.
Coat a new O-ring with oil and install it onto the
water pump.
Install the water pump onto the engine while align-
ing the flat end of the pump shaft with the slot in the
camshaft.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
WATER PUMP
BOLTS
O-RING
JOINT PIPE
O-RING
BOLTS
Align
O-RING
JOINT PIPE
COOLING SYSTEM
BYPASS (AIR BLEED)
HOSE
O-RINGS
WATER PUMP BODY
WATER PUMP COVER
O-RINGS
6-13
3/9/2008 10:47 PM